Blood Analysis System: Point of care blood gas, electrolytes, metabolites and hematocrit analyzer. Smart card technology for Self-calibrated room temperature storage cartridges. Wide range of parameter (11+10). Time to result 3-5mins. Small sample volume 92 ul is needed. Realtime wirelsess, LIS, HIS via data management system. Patient bed site testing
The NycoCard™️ READER II leverages robust technology with proved quality. The instrument is factory calibrated to ensure accurate results. It is a portable, battery-powered point-of-care instrument designed for rapid and reliable quantitative measurements of NycoCard™️ HbA1c and NycoCard™️ CRP.
Model- CS-2000i/CS-2400, Sysmex, Japan The CS-2000i/CS-2400 is a fully automated Blood Coagulation analyzer for In Vitro Diagnostic use. These models are capable of analysing samples using coagulation, chromogenic, immunoassay and aggregation methods. The analyzed data can be retained in the stored job list, displayed or printed. Printing is only possible
Model- CS-1600, Sysmex, Japan The CS-1600 is a fully automated Blood Coagulation analyzer for In Vitro Diagnostic use. These models are capable of analysing samples using coagulation, chromogenic, immunoassay and aggregation methods. The analyzed data can be retained in the stored job list, displayed or printed. Printing is only possible
Model- CA-600, Sysmex, Japan The CA-600 series is fully automated coagulation analyzer and can run Clotting, Chromogenic and Immunoassay including D-Dimer tests. Compact Fully automated SYSMEX reagent system found in all Sysmex coagulation analyzers Performs up to 5 clotting, chromogenic and immunologic assays simultaneously in true random access. Simple steps
Model- CA-104, Sysmex, Japan The CA-104 is a 4-channel, semi-automated, coagulation analyzer for clotting assays. The CA-104 can run PT, APTT, TT, Fbg, Intrinsic and Extrinsic tests. Very easy to operate Compact design. No need for a lot of space in your laboratory Results can be seen within a few
Model- CA-101, Sysmex, Japan The CA-101 is a 1-channel, semi-automated, coagulation analyzer for clotting assays. The CA-101 can run PT, APTT, TT, Fbg, Intrinsic and Extrinsic tests. Very easy to operate Compact design. No need for a lot of space in your laboratory Results can be seen within a few
Model- SP 50, Sysmex, Japan The SP-50 is a fully automated slide maker and stainer which can be integrated to XN 1500/3100/9100 series. The SP-50 is designed to process 30 to 75 slides per hour. Furthermore, the SP-50 can be connected with the Sysmex, fully automatic, hematology analyser XN 1000
Model- XN 1000, XN series, Sysmex, Japan The XN 1000 is a fully-automated 6-part differential hematology analyser from Sysmex, Japan. The XN 1000 has a wide range of 43 parameters. Furthermore, the XN 1000 has a sampler that allows both open and closed tube analysis as well as the continuous
Model- XN 550, XN-L series, Sysmex, Japan The XN 550 is a fully-automated 6-part differential hematology analyser by Sysmex, Japan, that has a wide range of 43 parameters. The XN 550 has a sampler that allows both open and closed tube analysis. The analyser is optimised for continuous Loading of
Model- XN 450, XN-L series, Sysmex, Japan The XN 450 is a fully-automated 6-part differential hematology analyser by Sysmex, Japan. It has a wide range of 43 parameters. The XN 450 works with a manual closed tube analysis method and it has automatic pre-dilution for Pre-diluted mode. The XN 450
Model- XN 350, XN-L series, Sysmex, Japan The XN 350 is a fully-automated 6-part differential hematology analyser by Sysmex, Japan with a wide range of 43 parameters. It works with an open tube analysis method and has automatic pre-dilution for Pre-diluted mode. The XN 350 runs up to 70 samples
Hi! We are part of the 150+ person Amd team. If you have any questions please do not hesitate to contact us.
Although originally established as a supplier of Medical Diagnostic products eg. Hepatitis and HIV test kits, we were requested to undertake water treatment engineering. This resulted from a meeting circa November 1997 between Fenton Holland (GM) Amd and Dr. Richard Jones, medical advisor for Texaco and Premier oil 1996-2000. Premier were offshore constructing the Yetagun gas pipeline from the Yetagun field to the coastline near Daminsek village and onto the Thai Border at Yadana. This seven hundred million dollar investment involved an offshore platform, onshore logistics centers and office and a major pipeline both undersea and onshore. Personnel from the UK were brought in to manage the project. Dr. Jones was concerned that of the twenty rental houses required for these personnel none had access to potable water. Follow up microbiological tests confirmed the need. It was decided to install water treatment systems capable of removing potential pathogens. Initially a pilot scale installation was done at 18 E Inya Road. Installation was completed in January 1998. Thereafter numerous other houses and the Premier office had filtration system installed and later maintained by Amd. The Yetagun project was eventually completed in 2000 and the gas flows to Thailand.
This remote northern town was once known as Fort Hertz. Even in 2004 it was an isolated and remote town with trucks from Myitkyina to Putao transiting for up to three weeks! This was one of the reasons we decided to install Australian made steel/zincalume prefabricated tanks, readily transportable on pallets. The hotel was to be built in Mulashidi approximately 7 km outside Putao. After an initial survey in 2004 we decided to pump water from the Nam Lang River, more than 50m below the hotel site. A plateau was carved out of the mountain side enabling the steel tanks and plant room to be built. The water treatment comprised modern filtration and chlorination and utilized Australian Davey pumps known for their small footprint, longevity and economic electrical consumption. In fact, we went on to install Davey pumps in the hundreds throughout Myanmar. The hotel became The Lisu and later The Malikha Lodge. In 2010, we were asked to expand upon our original design and our team once again deployed to Putao. The Malikha Lodge was built as an ECO & adventure Lodge. River Rafting and mountain hiking were envisaged. Those plans were made in 2004, however the full scope was never realized. Nonetheless a first-class lodge was built and bekons those adventure tourists.
The need to properly treat wastewater from a site employing four hundred people was recognized early in the design process. Amd retrofitted a large fiberglass packaged plant featuring several pump stations. The job was complicated by the existence of an old Septic system within the site. Amd’s highly skilled engineers, technicians and designers put their minds together to create an effective solution. The result, a complete, high quality, wastewater treatment system. Amd has further recommended that post effluent treatment would expand the options for disposal of the treated effluent.
When Coca Cola returned to Myanmar after a long absence, they took over a site used to manufacture local soft drink brands. Due to the requirement for expansion they ordered an extremely large prefabricated steel zincalume coated tank from Amd for raw water storage. Further requirements included the need for seismic rating in the event of Earthquakes or Tremors. Amd added a special Antivortex fitting required to meet firefighting codes. Once on site the 640m3 tank was installed in nineteen days including the erection of the necessary scaffolding, meeting all requirements and ready to use.